You Should Know Before Soldering Micro Switches

The micro switch is a sensor switch. To ensure the normal function of the micro switch, when manually soldering the microswitch, select a temperature less than 320 °C and ensure that the procedure can be completed within three seconds. Samaan aikaan, it should be noted that do not apply pressure on the terminal during work. Muuten, the device may not function properly.

If the switch is used on a relatively small current or voltage, it is best to use the Au cladding contact’s low power circuit. Samaan aikaan, when using the switch, pay attention to waterproofing, and the temperature should be within the specified range. Only by satisfying all the above conditions can the switch exert its maximum power and ensure the regular operation of the equipment. Only in this way can the service life of the switch be extended.

Unionwell: A China Microswitch Supplier & Manufacturer

Unionwell on rajakytkimien toimittaja ja valmistaja, jolla on yli kymmenen vuoden mikrokytkimien kokemus. Realizing the importance of limiting switch to industry development, pidämme sitä välttämättömänä tuotteena ja autamme paljon, jotta se toimisi paremmin. Viime aikoina, olemme kehittäneet uuden mallin rajakytkimen.

As a well-known manufacturer of microswitches in the industry, Unionwell has established good cooperative relations with many household appliances and automotive electronics manufacturers.

Welcome to our website for more information about the microswitch: https://www.unionwellswitch.com.